Paper Publications
- [1] Z.Y. Cai，X.D. Wu,B. Meng,M. Wan，M.W. Fu，A modified yield function for modeling of the evolving yielding behavior and micro-mechanism in biaxial deformation of sheet metals.[J:International Journal of Plasticity,2020):102707.
- [2] Zhengyang Cai，Bolin Ma,Zhigang Liu,Min Wan,Cheng Cheng，Xiangdong Wu，Thermal-mechanical behaviors of dual-phase steel sheet under warm-forming conditions.[J:International Journal of Mechanical Sciences,2017,126):79-94.
- [3] Zhengyang Cai，Min Wan,Zhigang Liu,Bolin Ma，Xiangdong Wu，Approximate method formulating plastic potentials of porous sheet metals with non-quadratic anisotropy.[J:International Journal of Mechanical Sciences,2017,123):198-213.
- [4] Zhengyang Cai，Keshan Diao,Min Wan，Xiangdong Wu，Constitutive modeling of evolving plasticity in high strength steel sheets.[J:International Journal of Mechanical Sciences,2016,107):43-57.
- [5] Zhengyang Cai，Min Wan,Zhigang Liu,Bolin Ma,Rui Zhao，Xiangdong Wu，Evolving hardening behaviors of high strength steel sheets under altered loading paths.[C:Procedia engineering,2017,207):131-136.
- [6] Zhengyang Cai，Keshan Diao,Min Wan,Cheng Cheng，Xiangdong Wu，Temperature-dependent yield criterion for high strength steel sheets under warm-forming conditions.[C:MATEC Web of Conferences,2015,21, 2015
- [7] BoLin Ma，XinJun Li,Min Wan,ZhengYang Cai，XiangDong Wu，Investigation on the hot formability of TA15 titanium alloy sheet.[J:Materials & Design,2016,94):9-16.
- [8] R. Zhao，X.J. Li,M. Wan,B. Meng,Z.Y. Cai，J.Q. Han，Fracture behavior of Inconel 718 sheet in thermal-aided deformation considering grain size effect and strain rate influence.[J:Materials & Design,2017,130):413-425.
- [9] Bolin Ma，Keshan Diao,Xinjun Li,Min Wan,Zhengyang Cai，Xiangdong Wu，The effect of the through-thickness normal stress on sheet formability.[J:Journal of Manufacturing Processes,2016,21):134-140.
- [10] B.L. Ma，M. Wan,Z.Y. Cai,K.S. Diao,J.Q. Han，X.D. Wu，Investigation on forming limit of advanced high strength steels (AHSS) under hot stamping conditions.[J:Journal of Manufacturing Processes,2017,30):320-327.
MOBILE Version