A numerical MK approach for predicting the forming limits of material AA5754-O
点击次数：
DOI码：10.1007/s00170-018-2332-z
发表刊物：The International Journal of Advanced Manufacturing Technology
关键字：Forming limit curve; Aluminum alloy; M-K modell; Cruciform specimen; Digital image correlation.
摘要：In this paper, the forming limit curve (FLC) of AA5754-O was predicted numerically through simulating the M-K approach with the consideration of initial groove orientation and investigated experimentally through the biaxial tensile tests. Firstly, the uniaxial tensile test and the equi-biaxial tensile test were performed to determine the mechanical properties and the anisotropic coefficients of Yld2000-2d yield criterion. Secondly, the numerical M-K approach considering the initial groove orientation and Yld2000-2d yield function was simulated to study the effects of the initial groove orientation and the imperfection coefficient on the predicted limit major strain. Finally, the shape of the cruciform specimen thinned at the center region was optimized for reducing the shear stress, and the optimized cruciform specimen was stretched under different loading paths to determine the experimental limit strains. Through comparing the predicted limit strain at uniaxial tensile stress state and the experimental one, the imperfection coefficient was confirmed, and a good agreement between the numerical result and experimental data was presented. This work showed that experimentally determining the limit strains through biaxial tensile test was achievable, and the proposed numerical M-K approach was effective for predicting the limit strains.
合写作者：M. Wan,X. D. Wu,C. Cheng,Z. Y. Cai
第一作者：W. N. Yuan
论文类型：期刊论文
通讯作者：B. L. Ma
学科门类：工学
文献类型：J
卷号：98
页面范围：811-825
ISSN号：1433-3015
是否译文：否
发表时间：2018-06-15
收录刊物：SCI